Plastic runway engineering design

1.400m plastic main track:
The project is located in Qiwu Middle School, and the track and field site is a 400-meter gauge runway with a total of eight tracks, each track is 1.220 meters wide, and the turning radius of the inner track is 38 meters; the practice is: soil compaction → 100mm gravel cushion → 150mm Thick with 6% cement dry concrete → 40mm AC-20 medium grain asphalt concrete → 27mm AC-10 fine grain asphalt concrete → plastic surface; plastic runway using traditional mixed polyurethane plastic surface layer, standard 13mm thick The thickness of the plastic surface of the runway and the attached area is 13mm, the thickness of the plastic surface of the thickened part of the runway is 20mm, and the thickness of the plastic surface of the shot area is 53mm.

2, 100m straight runway:
There are 8 runways in the straight runway. Each track is 1.220 meters wide. Some of them are located in the 400m runway. The plastic surface layer is 13mm thick. The bottom course is the same as the main runway.

3, long jump field:
For the two practice long jump and triple jump runways, located on the left side of the main runway, the runway is 1.22 m wide; the runway is the same as the main runway; the takeoff board is the active takeoff board, and the built-in plastic mud display board is attached. Thick and run-up thick areas with the raw material of the plastic surface layer; sand pit consists of 200 thick block stone and 53 thick red brick, filled with 100 thick fine stone layer, 100 thick gravel and 300 thick fine sand.

4, high jump area, shot area:
Separately located in the two semi-circular areas of the ring runway; the bottom approach is the same as the main runway, the surface of the high jump zone is 13mm thick red plastic surface layer, part of the thickened is 20mm; shot throw area of ​​the plastic surface is 53 thick, the stop board is Wooden appress board, painted white; throw ring cushion is 100 thick C15 prime cushion and 150 thick C25 concrete layer, the surface layer is prefabricated movable plastic surface layer thickness 20mm.

5, football field:
Located in the center of the ring runway, its length is 100 meters, 64 meters wide; with two deputy goal, is a movable goal; the football field uses 50mm8800dtex * 14000 needle imported artificial grass, divided into two colors.

6, drains:
The cushion is a 100-thick gravel cushion and a C15 concrete layer; the ditch wall is made of MU10 bricks, and M5.0 cement mortar is used for masonry. The inside of the ditch wall and the bottom of the ditch are selected by 1:2.5 of cement mortar and brushed and lighted to a thickness of 20; 150mm thick C20-concrete concrete was poured; the width of the stormwater ditch was 300mm, and the drainage slope was 0.5%.

7, rain tube:
The pressure-reinforced reinforced concrete rainwater pipe is used with a diameter of 300mm; the stormwater drainage slope is 0.8%, and the root of the pipe is a plain concrete foundation.
The thickness of the mixed plastic runway shall be at least 13mm, and the thickened area (such as pole vault, javelin, long jump, and high jump) shall be greater than 18mm.

Training Desk

A training desk is a table designed specifically for activities such as training and meetings. It has characteristics such as durability and ease of movement, which can meet the needs of different groups of people. Training desks can be classified into various categories based on their materials, structure, and other aspects. Below will be a brief introduction to the classification of training desks.
1. Material classification
The materials of the Training Chair mainly include wooden boards, PVC boards, etc. Training desks made of wood usually have strong stability and durability, making them suitable for long-term meetings or training activities. The training table made of PVC board has certain safety performance and is generally more lightweight.
2. Structural classification
The structure of training chairs mainly includes single tables, combination tables, etc. A single chair is the most common training table, and each training table is independent and can be adjusted as needed. Combination refers to the combination of multiple seats together, usually in the form of geometric shapes or rows, suitable for use in large training venues. A stackable table is a training table that can be folded and placed together, saving space and facilitating storage and handling.

Training Table,Tea Table,Coffee Table,Visitor Table

Foshan Shengshi Zhihui Technology Co., Ltd. , https://www.szhfurniture.com

Posted on