The electronic scale adopts an electronic weighing device integrated with modern sensor technology, electronic technology and computer technology, which makes the weighing result faster and more accurate. Mastering the correct charging knowledge not only facilitates your work, but also extends the life of the instrument.
1. Three indication states of the charger:
1. Charging instructions for handheld display:
When the under-voltage sign on the hand-held display mark is displayed, it indicates that charging is required.
After the sign lights up, the meter can still be used for 15 minutes, and automatically shut down after 15 minutes to protect the battery.
2. Charging method of handheld display
To charge the meter, please use the charger provided with the device. Do not replace it with other power sources, otherwise the meter and battery may be damaged.
It takes about 5 ~ 7 hours to fully charge the battery. After being fully charged, the smart charger will automatically switch to a trickle state.
3. Under-voltage prompt of the transmitter battery
When the handheld display is in the process of normal communication weighing, the first digit from the left of the meter displays "L".
☉Notes for charging the transmitter battery
Insert the battery to be recharged into the battery jack of the supplied charger, the charger enters the charging state (see the use of the charger for details), and it takes about 5 to 7 hours to fully charge the battery of the scale body.
After the battery is fully charged, the smart charger will automatically switch to a trickle state.
Second, battery safety matters:
This device is powered by a rechargeable battery, please observe the following precautions:
1. Only after two or three cycles of charging and discharging, the new battery will achieve the best performance.
2. In order to extend the service life of the nickel-metal hydride battery as much as possible, please charge the battery until it is under voltage.
3. Do not short circuit the battery water, short circuit will damage the battery
4. Do not short-circuit the battery plug, otherwise it will be charged once every three months. Damage the battery and short circuit.
5. If the battery is left unused for a long time, "On" means that there is no data in the memory and cannot be cleared.
dCLL displays the above prompt after power-on self-test, and the under-voltage sign lights up, and automatically shuts down after two seconds, indicating that the battery of the handheld instrument cannot be used normally due to under-voltage. Please charge it.
L——After the power switch of the crane scale is turned on, if the handheld instrument displays the above prompt, it means that the battery at the crane scale is under voltage. Please charge it. At this time, the transmitter of the crane scale will automatically shut down after a few seconds.
3. Maintenance and safety matters:
1. Avoid violent collisions and long-term rain. In particular, care should be taken to prevent the scale body from falling from the hook, and falling from a height will cause serious damage to the hanging scale.
2. Non-high temperature crane scales cannot work under high temperature environment.
3. It is strictly forbidden to perform electric welding operation on the scale body, otherwise it will damage the A / D transmitter and sensor.
4. Overload should be prevented.
5. Pay attention to protect the antenna from collision and water. In case of damage, please contact the supplier, do not replace the connection with other items.
6. When the hanging scale is in normal use, the antenna does not need to be removed every day. The antenna is often disassembled and assembled, which is easy to wear the antenna and the socket.
7. If the hanging scale is not used for more than one month, please remove the battery.
Lace Babydoll,Bodysuit Lingerie,Jumpsuits And Rompers,Sexy Lingerie Babydoll Sleepwear,Yoga Sports Bodycon Rompers Jumpsuit
Hun Yuan Ya Lian Wan Jia Dian Zi Shang Wu You Xian Ze Ren Gong Si , https://www.ylwjastragalus.com