Flexographic Digital Products Curl Causes and Solutions

In flexo printing, there are occasions where the paper is curled to the front, making the appearance of the product uneven, and affecting the customer's use in severe cases.

The reason for this phenomenon is that hot air helps drying during the flexo printing process. When printing is complete, the moisture content of the paper itself is less than the white material before printing. In addition to printed matter, UV coating is generally required. In this way, the front side of the printed matter is protected by a UV layer, which plays a role in the contact with the air, resulting in a small extension. On the other hand, because there is no protective layer on the reverse side, the paper is affected by the humidity of the air, and the paper is surely elongated. Moreover, the paper itself is subject to deformation due to different humidity. The reverse is larger than the front, and the product is curled upward. We might as well do a little experiment: Place the product of the flexo-printed UV coating on a cup with a certain water temperature, and steam upwards to make the paper face wet. We can see that the UV is facing the cup mouth and receives moisture, and the product is almost not deformed; but if the back is toward the cup, the product will be deformed immediately and curled toward the front.

After knowing the reason, we can take measures: on the back of the paper, apply a layer of material with a minimum amount, so that it acts as a protective layer in contact with the air. For example: Arabic gum 3% ~ 5%, this phenomenon is basically resolved.


Source: Ke Yin Network

Synthetic Fringes

Human Hair Bangs can well modify various face shapes. also you can cut the bangs to any length as you like to fit your face and your hairstyle.becoming cute and sexy attractive in one second when dating/party/wedding/daily use.
The bangs are made of high-quality virgin hair, hand-crocheted. you are free to perm and dye. human hair will show white smoke while burning and will turn to ash.
Clip in hair bangs with temple are made of human hair, sewn in good clips. the clips have a strong strip and seam is barely invisible, so other people cannot tell it is a bang on top of your own hair. also enough thickness to cover the forehead without worrying.
Frequent styling may cause dry end or split. use mild hair conditioner can prolong the usage of extensions.
Neat blonde bangs use 100% high quality synthetic fiber, no smell, very natural looking.suitable for many occasion blonde hair bangs for halloween, cosplay, custom, party
Take out the bang and open the 2 clips, put it aside. use a comb to part your hair down the center. place the bangs near the crown of your head.secure the 2 clips.cover the clips and the edge of bangs with your hair.then a beautiful bangs has been finished.

Synthetic Fringes,Clip In Hair Bangs,Fringe Hairpieces Hair Extensions,Clip On Bang Fringes

Xuchang Le Yi De Import And Export Trade Co., Ltd. , https://www.alileaderbeautys.com

Posted on