Amusement facilities: These are facilities that are used for business purposes, operate in closed areas, and carry tourists to play. With the development of science and the progress of society, modern amusement machines and amusement facilities have fully utilized advanced technologies such as machinery, electricity, light, sound, water, and force, integrating knowledge, interest, science, and thrilling into one, deep Widely popular with teenagers and children. It has played an active role in enriching people's lives, exercising their physique, tempering their sentiments, and beautifying the urban environment.
Types of amusement facilities. There are a wide variety of modern amusement facilities, with a wide range of structures and sports types, and a wide range of sizes and sizes. At present, recreational facilities are divided into 13 major categories according to the characteristics of sports: horses, taxis, gyros, flight towers, racing cars, self-controlled aircrafts, ferrying cars, small trains, and overhead tour buses. Optoelectronic shooting, water amusement facilities, bumper cars, battery cars, etc.
Safe use of amusement facilities. Pleasure must be safe and secure.
1. Security Insurance Measures
The rider’s part of the ride that operates in the air should be solid and reliable, and important parts and components should adopt insurance measures.
The number of steel ropes or chains used for hanging passengers must not be less than two. In connection with the seat part, it must be considered that a balance can be maintained when disconnected.
Doors that close the cockpit more than 1m above the ground must be equipped with two locking devices or a locking device with insurance that cannot be opened inside. Barriers to the entrance and exit of unclosed cockpits should also have locking devices with insurance.
When the amusement ride is in operation, when the power supply suddenly loses power or the equipment fails, which endangers the safety of the passengers, an automatic or manual emergency parking device must be provided.
In the event of a failure in the operation of amusement facilities, there should be measures to ease passengers.
2. Passenger restraint device
When the amusement ride is in operation, a passenger restraint device must be provided when the passenger is likely to be moved, bumped, or thrown or slid out of the ride. For larger risky amusement facilities, two sets of independent restraint devices should be considered when necessary. Seat belts, safety levers, levers, etc. can be used.
Tethering device: It should be reliable and comfortable, and the parts that are directly in contact with people have appropriate softness. The design of the restraint device should prevent pinching or crushing of a part of a person's body. It should be easy to adjust and operate.
Seat belt: It can be used alone for facilities that sway gently or slowly, without turning over and not being thrown out of danger. The use of seat belts should generally be accompanied by hand grips. For sports facilities, seat belts can be used as an auxiliary restraint device.
Safety Clamp: When the amusement ride is running, it may lead to danger of being thrown out by people. A corresponding type of safety pressure bar must be set; the safety pressure bar itself must have sufficient strength and locking force to ensure that the tourists are not thrown or Drop it and stay locked until the device stops running.
3. Safety requirements for security fences and platforms
Safety fences should be set in and exported separately, and guide fences should be installed at the entrance. Platforms should have anti-skid measures. The opening direction of the security fence door should be the same as that of the passenger (except in special cases). To prevent injury to the hands of the person when the door is closed, the gap between the door frame and the column should be appropriate, or take other protective measures.
While running and riding people's rides, the passengers' entrance and exit should not be higher than the station's 300mm. The height of the entrances and exits of other amusement facilities that ride on people’s part should be convenient.
4. Other safety requirements
Recreational facilities should set up prominent safety signs at the necessary places and locations. Safety signs are divided into four types: prohibition mark (red), warning mark (yellow), instruction mark (blue), and warning mark (green).
Exposed sharp edges, sharp corners, burrs, and dangerous protrusions are not allowed where passengers can touch.
In the culverts passed by amusement facilities, the containment surfaces should be made of materials that are not easy to fall off, and the ornaments should be fixed firmly.
The number of passengers must be marked on the number of passengers, and overload operation is strictly prohibited.
Every tourist must pay attention to the above-mentioned several amusement equipment safety measures at the same time, so that you can enjoy playing during the play.
The company Sports Equipment Co., Ltd. specializes in manufacturing: children's play equipment
The company's Sports Equipment Co., Ltd. specializes in the production of children's slides and a variety of play equipment, full range, is your best choice for shop operations, community, public places, schools. Hotline Tel: Website: Factory Address: No. 16, Chuangqiang Road, Lucheng District, Wenzhou City, China.
Chairs,High Quality Chairs,Chairs Details, CN
Queen Furniture Co., Ltd. , https://www.queenfurnitures.com