Instructions for use of Shanghai Baidian constant temperature circulating water bath

Instructions for use of constant temperature circulating water bath:

1. Inject appropriate amount of clean tap water into the water tank.

2. Adjust the temperature control knob to the lowest (adjust the temperature gradually from left to right).

3. Insert the power plug of the machine into the power socket and turn on the power switch.

4. Place the small control switch in the "Setting" section. At this time, the temperature displayed on the display is the set temperature. Adjust the knob to set it to the temperature required for your work. (The working temperature you set should be higher than the ambient temperature, at this time the machine starts to heat up, the yellow indicator light is on, otherwise the machine does not work)

5. Put the small switch of the control part at the "measurement" end. At this time, the temperature displayed on the display is the actual temperature of the water in the water tank. As the water temperature changes, the displayed number will change accordingly.

6. When the heating reaches your desired temperature, the heating will stop automatically and the green indicator light will be on; when the heat in the water tank is dissipated and is lower than the temperature you set, a new round of heating will start again.

7. If you find that the water temperature is uneven, you can turn on the stirring function and slowly adjust the stirring knob to allow the automatic circulation in the box.

Pet Carrier Bag & Bag

Ningbo XISXI E-commerce Co., Ltd , https://www.petspetsproducts.com

Posted on