Water bath nitrogen blower installation problem after purchase

Water bath nitrogen blower installation problem after purchase

Water bath nitrogen blower rack installation: water bath nitrogen blower rack consists of two sides, a beam and a bottom file. There are four standouts on the side legs, which are used to adjust the height of the rack. installation

The height of the rack can be adjusted to 72 cm.

Water bath nitrogen blower mounting platen and motor: There are four holes on the platen, they are both the mounting holes of the motor and the positioning holes of the motor. When installing, just put four on the motor base

The elliptical holes are aligned with the four holes on the platen and fixed with bolts and nuts. If the motor pulley is not in line with the belt groove on the platen, loosen the four nuts.

Use the four oval holes on the motor base to align the motor. Finally, the table is fixed to the frame with wood screws.

Water bath nitrogen blowing machine head installation: The left and right positions of the machine head on the platen are based on the alignment of the belt groove on the wheel and the belt groove on the motor wheel. Front and rear position of the nose,

It is based on the fact that the cut cloth can fall into the drop opening on the platen. If there is no blanking on the platen, the base of the head can be about 12 cm from the edge of the platen (on the side of the operator). machine

After the head is positioned, the head chassis is fixed to the platen with wood screws.

Installation of electric water bath nitrogen blowing instrument: randomly supplied electric appliances, water bath nitrogen blowing instrument is generally three-phase plug, the wires and switches have been assembled. When installing, you can put the switch box first.

Fix it to the lower right side of the platen with wood screws, then remove the junction box cover on the motor, connect the three phase wires to the three terminals on the side, install the junction box cover, and plug the plug into the power supply.

The water bath nitrogen blower can be tested.

Water bath nitrogen blower installation problem after purchase

Backpack

Backpack,Small School Bag,Back Pack,Small Backpack

GUANGZHOU KOBE LEATHER CO.,LTD , https://www.kobebags.com

Posted on