Nowadays, there is at least one stapler in every office, which provides us with the ideal means of binding many sheets of paper together for storage. I believe many students also have staplers in their homes.
What are the stapler needle models?
The uniform staple needle is (width * height): pointed, 11.5 * 6, mm, is the most common stapler used. Others: There are: 8.4*5, mm long legs: 11.5*10, mm can measure the size of the stapler and buy a suitable needle shape. The model examples are as follows: 10# (No10): 8.4*5, mmB-8: 11.5*7, mm24/6: 11.5*6, mm23/6: 11.5*6, mm23/10: 11.5*10, mm23/15: 11.5*15, mm.
How to install the stapler needle?
1. First install the handle, put the handle prepared with the box into the right side of the binding machine and screw it tightly. Read the instructions carefully before binding, and consider the amount of paper to be bound.
2. Adjust the scale by adjusting the scale with the adjustment screw (installed behind the binding machine) to adjust the paper margin. When adjusting, the diameter of the pull ring is large, the margin of the paper is adjusted, the diameter of the pull ring is small, and the margin of the paper is small. You can adjust the appropriate paper margins according to your needs.
3. After the paper is placed, we need to punch the paper, arrange the paper neatly, close to the positioning block, and then feed the paper into the machine in parallel. When the top is in place, press the paper with the left hand, hold the handle with the right hand, and press down. Move the paper through the blade and lift the handle.
4. Before the binding, we also need to give the needle to the machine. First, loosen the fixing screw on the needle holder, remove the needle holder, and hang the hook of the end of the binding needle into the fixing hole of the binding needle to keep it vertical. Put the needle in the position of the rod, and finally tighten the fixing screws on the needle.
5, proceed to the last step, binding, first press the presser foot wheel in the clockwise direction to raise the presser foot, put the binding material under the presser foot, put the paper into, release the presser foot handwheel to automatically press, then put After the presser foot wheel is rotated counterclockwise by about 180°, the pin handle is rotated counterclockwise, and the pin is passed through the material. After the lead arm automatically hangs the thread in the staple hook slot, the handle can be lifted upwards. At the same time that the staple is withdrawn, the binding line will follow the lock, and then the presser hand wheel will be released clockwise. You can complete the one-shot binding and repeat the above procedure.
The above is an introduction to the stapler needle model and the method of installing the stapler needle. I hope that these contents will bring you some help.
Our factory is established in 1989 and located in Heshan, Guangdong, the hometown of overseas Chinese in China. The factory covers an area of 80,000 square meters and a construction area of 120,000 square meters. It has a total investment of more than 200 million RMB and has more than 500 employees, 10 with master degree or above, 43 with bachelor degree or above, and 82 with middle and high vocational talent. With an annual output value of more than 400 million RMB in 2019 and won the title of taxpayer for many years.Our company has the largest production scale of single product for folding tent in the world, with an annual output of more than 1.5 million pieces, and the annual output of small umbrellas is more than 8 million. It is exported to more than 70 countries and regions such as Europe and America with a large number of loyal customers. The main products are medium and high-grade steel and aluminum folding tents, sublimation transfer folding tents, advertising umbrellas, advertising printing tents, etc. The company has been committed to research and development, production and sales of folding tents and umbrellas. 30 years of perseverance have created different product quality and market positioning. We are constantly innovating, launching many new products and applying for related patents every year, and have been leading the development of domestic and foreign markets.Our company has customized advertising tents for large domestic companies, and has established good strategic partnerships with Danone, China Mobile, China Telecom, Coca-Cola, Libai Group, Master Kong. We also supply large and medium-sized supermarkets in Europe and America, such as WALMART, SHOPRITE, ALDI, etc., as well as mainstream e-commerce and domestic cross-border e-commerce. Mainstream e-commerce customers include the top three tent e-commerce companies in Europe and America, such as EZ-UP, COLEMAN, TOOLPORT, and domestic cross-border e-commerce companies, such as Aoji, Global E-commerce. Our company has all kinds of related certifications, such as high-tech enterprises, BSCI EU social standards certification, ISO9001 quality system, ISO14000 environmental protection system, WALMART anti-terrorism factory inspection certification, etc., which can fully meet the requirements of mainstream customers in the world.
3mx4.5m,High Quality 3mx4.5m,3mx4.5m Details, CN
HESHAN YUEHAN UMBRELLA MANUFACTURING CO., LTD , https://www.sunplustent.com