Stripping tester is what we call tensile testing machine. What is tensile testing machine ? Tensile testing machine is used to mechanically test the mechanical properties of materials such as static load, tension, compression, bending, shearing and peeling. Force testing machine.
If you buy a peeling tester, you must pay attention to the operating procedures. Here we introduce the peeling tester's operating procedures. Everyone should try to do the following in the normal operation so as not to cause bad losses.
First, choose a site for test products
Second, ensure that all wiring is correct before testing the machine and warm it up for at least 15 minutes to pack the sensor's stability.
Thirdly, according to the test, the positions of the upper and lower limit blocks are reasonably set to prevent the over-travel of the instrument and cause damage to the fixture and the sample.
Fourth, when pressing the fast-rising or fast-decrease key, do not place your hand between the moving beam and a fixed specimen, fixture, or test device to prevent injury.
Fifth, prohibit the use of overloaded, ultra-speed machines.
Sixth, it is forbidden for a hard object to collide with the lifting screw and apply lubricant on time.
Seventh, when replacing the V-belt mechanically, pay attention to the position of the hand to prevent the fingers from being pinched, and the cover of the transmission must be covered.
Eighth, when the electronic stepless speed adjustment type adjusts the lifting speed, it must not be operated too fast.
Ninth, to do more than 50KN powerful machine before use, pay attention to check the fixture tightening screw tightening.
Tenth, when the upper and lower clamps are lifted, the operation must be smooth and avoid collisions. Check the tightness of the clamp screws frequently.
Eleventh, peel test machine replacement test fixture, pay attention to prevent bruising.
Twelfth, when opening the clamp to clamp the sample, pay attention to the clamping distance of the sample, not too much or too little.
Thirteenth, when the tension testing machine and the micro computer are connected to the machine, they must be operated according to the procedure, and it is forbidden to cause the program to be disordered due to illegal operation .
Fourteenth, need to print the parameter Before printing, check if the printer has paper and add it in time.
Fifteenth, after the completion of the operation according to the procedure to shut down the machine, it is strictly prohibited to directly cut off the power.
Sixteenth, strict implementation of the annual inspection system, regular national appraisal agencies for parameter identification and certification.
eyeshadow brush is a make-up tool used to make eye shadows, so that the eyeliner and the eye shadows around the eyes and under the eyebrows are fully integrated, and the color layering is drawn out. Eyeshadow brushes include primer brushes, tapered brushes, detail brushes, and blending brushes. The main difference between different types of eye shadow brushes is the shape and size of the bristles. Different eye shadow brushes such as:blending eyeshadow brush,eyeshadow brush for blending,eyeshadow brush makeup,flat eyeshadow brush have different usage methods.
Eye Shadow Brush,Eyeshadow Brush Best,Eyeshadow Sponge,Makeup Eyeshadow Brush, Blending Brush,Double Makeup Brush
Shenzhen Nanfang Shishang Cosmetic Utensil Co., Ltd. , https://www.nfbrush.com