2. Check whether the supply voltage meets, generally should not exceed ±6%.
3. Check the emergency stop switch, before and after the safety gate switch is normal. Verify that the motor and oil pump are in the same direction of rotation.
4. Check whether each cooling pipe is unimpeded for a long distance and pass cooling water into the oil cooler and the cooling water jacket at the end of the barrel.
5. Check for grease on all moving parts and add enough oil.
6. Turn on the heat and heat each section of the barrel. When the temperature of each section reaches the required temperature, it is kept for a period of time to stabilize the temperature of the machine. The holding time varies according to the requirements of different equipment and plastic materials.
7. Add enough plastic in the hopper. According to the requirements of injection molding different plastics, some raw materials are best dried.
8. To cover the heat shield on the barrel, this can save energy, but also can extend the life of the electric ring and contactor.
Injection molding machine operation
1. Do not arbitrarily cancel the role of the security door for the sake of convenience.
2. Observe the temperature of the pressure oil and do not exceed the specified temperature. The ideal working temperature of hydraulic oil should be kept between 45-50°C, and it is generally suitable in the range of 35-60°C.
3. Pay attention to adjust each stroke switch to avoid impact when the machine moves
At the end of the injection molding machine work
1. Before shutdown. The plastic in the barrel should be cleaned to prevent oxidation of leftovers or long-term thermal decomposition.
2. The mold should be opened so that the toggle mechanism time is locked.
3. The workshop must be equipped with lifting equipment. Care should be taken when mounting and disassembling the mold to ensure production safety.
PE Raincoat is often used for disposable such as travelling, hiking...
all kinds of Raincoat with long sleeves and can be opened in the front with 3 or 4 plastic snaps
Can make as customers' sizes and colors.
Nice style and eco-friendly, security for human.
Your logo and favorite pictures are greatly welcome.
We have thousands of different products for customer to choose and customer could mix different products into one container.
We can make small trial orders for customer to help customer to start the business or make the investment risk as low as possible.
We have professional quality control teams to make every shipment goods perfect and customer doesn't need worry about the quality problem to hurt his business reputation.
We could also help customer to order directly with factories and customer just need pay us a reasonable commission, thus customer could get factory-direct cost price and no need to worry about too many factories controlling problem, this is a real B to B business mode and fully one stop purchasing service support.
If you are interested in such business, you just need to contact us and only need to try from small orders and of course you could also check our business reputation from our other worldwide customers.
PE Raincoat
PE Raincoat,Disposable PE Raincoat,Plastic PE Raincoat,Transparent PE Raincoat
Zhaoxian Tengxing Plastic Fashion Co., Ltd , https://www.goodraincoat.com