Qilu.com May 25th reporter learned from the website of Shandong Administration for Industry and Commerce that solid wood furniture refers to pure solid wood furniture, that is, all materials are natural materials that have not been reprocessed, and do not use any wood-based furniture. Pure solid wood furniture has high requirements on craftsmanship and materials. Solid wood selection, drying, finger jointing, seaming and other requirements are very strict. It is precisely because of the strict technical requirements of solid wood furniture, the selection of materials is also very strict, resulting in the value of solid wood furniture soaring.
When buying solid wood furniture, pay special attention to the following points:
First, judge the tree species
This is a factor that directly affects price and quality.
Ordinary solid wood furniture usually uses eucalyptus, white oak, ash, eucalyptus, eucalyptus, rubber wood, eucalyptus, while the valuable mahogany furniture mainly uses rosewood, wenge, rosewood.
The market for solid wood furniture is rather chaotic, and there are often things that are shoddy and confusing trees. It is best to buy brand-name products. At the same time, it should be noted that the price of wood is rising day by day, and it is absolutely cheap to be too cheap.
Second, verify the solid wood
A mystery to judge whether it is solid wood furniture is: wood grain and thrift.
Such as a cabinet door, the appearance looks like a pattern, then the position corresponding to the change of the pattern, the corresponding pattern on the back of the cabinet door, if the correspondence is very good, it is a pure solid wood cabinet door.
In addition, watching thrift is also a good way to identify solid wood: optimistic about the location of the scar side, and then find the corresponding pattern on the other side.
Third, looking for defects
The main stress-bearing parts of the furniture, such as the column and the load-bearing horizontal strip connecting the column to the ground, should not have large knots or cracks. The structure is firm, the frame must not be loose, and it is not allowed to break or break the material.
The components of the wood-based panels used in the furniture shall be edge-sealed, and the various accessories shall be installed with few pieces, missing nails and nails.
Fourth, observe the wood
Open the furniture cabinet door and drawers and observe whether the wood is dry and white, and the texture is tight and delicate. If you have furniture made of materials such as particle board, MDF and one-time forming board, open the door or drawer and smell it for a pungent smell.
Five, security performance
Observe the presence or absence of the drawer or the door frame tilting phenomenon, whether there is a skew of the eye caused by the twisted eye position or the eye hole is too large, and the hoe is not strict.
Wooden furniture should be safe and stable. When the two doors are opened 90 degrees, the hand should be gently pulled forward, and the cabinet should not be tilted forward automatically; the glass of the bookcase door should be edging; the mirror and The dressing table should be equipped with a back panel, and the bead should be fixed to the glass surface. Individual parts of the furniture (such as legs, drawers, doors or brackets) must have sufficient support. You can push the top corner of the furniture or sit on one side and try to make sure the furniture is firm.
Sixth, inspection intensity
The strength of the board surface can be pressed with a finger to feel the firmness of the board surface. One side of the material should have a well-shaped skeleton to fix. If the skeleton is sparse, the surface will feel empty and false, and the panel will vibrate greatly. The bottom of the drawer should be pressed by hand to test the strength. Generally, the bottom of the partition is multi-layered with a large area. The partition should be made of five-layer board.
Seven, test slide
The drawer should be strong and secure with the screws tightened inside. It is a good idea to open the drawers, the event table, the doors and other parts to see if they are safe to use and connect properly.
Eight, check the interface
Heavier furniture should be screwed with a protective block at the corner and glued. As for the back plate part, it is also necessary to check whether it is set and the screws are attached.
Nine, "stand up" test
Turn the chair upside down on the furniture and look at how they are made.
As for the table, check from the bottom. See if the seams are reinforced with screws and wedges, and the slats are fastened to the crosspieces? There are no excess glue and filler in the seams.
Ten, touch the surface
Place your hand on the surface of the furniture and carefully check whether the polished surface is smooth. In particular, check whether the table legs are rough, whether the paint is streaked, whether the pigment in the corner is too thick, and whether there are cracks or bubbles.
Xianghe Furniture City official website
Cotton Eye Patch is a commodity for improving the quality of sleep. The material makes it very comfortable and it has many divers patterns to choose, such as cute animals and cool fonts on it. It can be used by people of any age.
Eye Patch,Eye Patch For Kids,Cotton Eye Patch,Plush Eye Patch,Leather Eye Patch,PU Eye Patch.
Jilin Y.F. Import & Export Co.,Ltd , https://www.jlyoufoundit.com