[ Chinese wardrobe net ] The wardrobe highlights the taste of life. As a private space, the custom closet expresses the pursuit of life from one side, and a novel style and cheap custom wardrobe is also the object pursued by many people. The popularity of furniture, many people choose to use a custom closet, the following will follow the home to understand the custom wardrobe what material is good - custom wardrobe 6 points of attention.
Customized wardrobe notes 1: profiles
There are two types of profiled substrates that are practical for sliding doors: one is aluminum alloy and the other is plastic steel. Customized wardrobes are high-grade materials for sliding door substrates due to their light weight and high strength. Has gradually replaced plastic steel products. Customized wardrobes and aluminum alloys are divided into ordinary aluminum-magnesium alloys and smaller aluminum-magnesium alloys for special aviation. Customized wardrobes have higher strength and lower weight due to aluminum-magnesium-titanium-silicon alloy. Therefore, it is favored by consumers, but the cost is several times that of ordinary aluminum-magnesium alloy. When looking at the profile, not only pay attention to the substrate, but also observe its surface treatment. Advanced surface treatments include anodizing, electrophoretic coating carbon coating, etc. These processes have higher hardness and aesthetics than simple spraying and plating. Customized wardrobe US kd uses an electrophoretic film with a film thickness of 20 microns, and the adhesion reaches the international highest standard of 0, with unparalleled scratch resistance.
Customized wardrobe note 2: top and bottom rail
When choosing a sliding door in a custom closet, try to choose the top and bottom rails with the same material as one material, so that the top bottom rail is the load-bearing part. To withstand repeated friction, custom-made wardrobes, so the top and bottom rails must have high strength and wear resistance. The top and bottom rails are made of aluminum-magnesium-titanium-silicon alloy with higher strength and strong deformation resistance, which can extend the service life of the customized wardrobe.
Customized wardrobe note three: top bottom wheel
Customized top and bottom of the wardrobe is an important part of the sliding door. It is necessary to pay attention to the selection of high quality bearing pulleys. The exterior of the custom closet bottom wheel is made of FRP material, which has the characteristics of high strength, wear resistance and low noise. Using push-pull more than 100,000 times, the custom-made wardrobe wheel body is treated with three-degree polishing and plating, never rusting.
Customized wardrobe note four: strip
The main materials popular in the market are PVC rubber, silica gel and the like. The silica gel strip is made of a non-toxic, non-corrosive silicone material. It also maintains good toughness at ultra-low temperatures, ensuring a flexible connection between the sheet and the profile.
Customized wardrobe note five: sheet, substrate
The common leeks used in cabinet plates are blockboard, MDF, and moisture-proof particleboard. The most cost-effective custom-made wardrobe is the moisture-proof particleboard, which has the advantages of light weight, high strength and strong nail holding power, but the moisture-proof particleboard also has different qualities.
Customized wardrobe notes six: glue, edge banding, veneer
The edge banding mainly seals the section of the sheet. The custom closet is protected from the damage caused by the environment or the unfavorable factors in use (mainly moisture). Customized wardrobes also achieve decorative effects. Ordinary glue has a pungent odor due to the presence of formaldehyde, and there is a risk of carcinogenicity. Therefore, when purchasing, pay attention to whether the cabinet has any odor.
Lip Gloss Paste,Paste Lip,Lip Gloss Matte Bean Paste,Lip Glaze Color Paste
Guangzhou Shishi Daily Chemical Co.,Ltd. , https://www.gzcosmeticok.com