[ Chinese wardrobe network ] In today's closet shopping malls, the overall wardrobe continues to heat up, and is loved by the vast consumers. However, consumers often have doubts about how to choose a wardrobe. Here, Netease Home deliberately starts from the three aspects of the panel, edge banding and veneer of the wardrobe to teach consumers to identify the quality of the wardrobe.
One or three strokes to see the quality wardrobe
1. Is the board environmentally friendly?
The formaldehyde content of the board is the primary factor to consider when purchasing a wardrobe, as this is closely related to our health. When shopping, consumers can close the door and wait for about 5 minutes, then yank open the door and smell the nose with no smell. There is an odor indicating that the formaldehyde content may exceed the standard and is a poor quality product.
2. Is the edge sealing strict?
Some manufacturers have no professional equipment, and the production of the wardrobe products is rough, and there are obvious edge collapses around them. Some even cut corners and cut only the front side of the board. The unsealed surface easily absorbs moisture from the air, causing the sheet to swell, causing the wardrobe to deform and affecting the service life. Professional manufacturers use precision panel saws to cut sheets without cracking around the sheets. After sealing around, it can effectively prevent the moisture in the air from intruding into the interior of the board.
3, whether the veneer wear
The professional manufacturer uses the environmentally-friendly melamine veneer with thick thickness and high temperature and high pressure treatment, which has high surface strength, abrasion resistance and scratch resistance. Inferior wardrobes produced by unscrupulous merchants are selected from low-priced panels on the market. The surface is covered with Pauli paper and ornate paper sheets. It looks good. In fact, the wear resistance is poor, and it can be clearly marked with a fingernail. Scratches.
In short, a quality wardrobe is solid and reliable in terms of materials and workmanship. Consumers should pay attention to careful identification when purchasing.
Second, the 13 principles of wardrobe purchase
1, look at the quality
Smell the smell, good material no matter how new or no pungent taste; touch the edge is smooth, delicate, strong adhesion; see whether the hardware accessories are branded with their own brand anti-counterfeiting.
2, do less layers, do more racks
Because the area of ​​the wardrobe is calculated according to the three-dimensional area, the calculation method of the laminate is the total area of ​​the five sides. If more layers are used, the price may be very expensive. It is reported that more consumers now choose to do more clothes rails, one is practical, and the other is more cost-effective.
3, non-standard combination method is more expensive than standard
Because the standard combination has been streamlined, if it is to be customized, the price is more expensive.
4. Is the variety of door and material color rich and diverse?
Different consumer concepts correspond to different color hobbies. The materials currently available for the production of sliding doors on the market are mainly wood, glass, mirrors and other special materials. The colors include eucalyptus, cherry, maple, maple, oak, black walnut, white pine and so on.
5. Is the thickness of the door panel full and thick, and the height is sufficient?
For the sliding board, it is best to choose 10mm or 12mm thick board, which is firm, stable and durable. The slightly worse one will be 8mm thick, which is thin and frivolous. The height of the door panel determines whether it can be renovated to the top of the ceiling. It requires a single piece of plate with a height of 2.8 meters or more and up to ceiling.
6. Is the color of the door and the border uniform?
The border and door panel of the brand wardrobe door are from the same manufacturer, and the color lines can be completely consistent and uniform. The miscellaneous wardrobes tend to be patchwork, and only the plates and frames with similar colors can be found, which cannot be completely consistent.
7. Whether the wheels are smooth, pressure-resistant, wear-resistant, safe and reliable
The pulleys of the brand wardrobe are generally made of carbon fiberglass, with balls inside and with non-drying grease, so it can be easily pushed and pulled, smooth and flexible, and has large bearing capacity, pressure resistance and wear resistance. The pulley guide is the core technical part of the sliding door, so be sure to choose carefully.
8. Is the cabinet professional and the design scientific and fashionable?
The current fashion wardrobe cabinet is very scientific and reasonable. In accordance with the principle of “reconstruction to zeroâ€, several different sub-cabinets have been developed, which can be freely combined and combined when ordering. Moreover, the drawers and the movable floor panels can also be freely increased or decreased, the height can be adjusted at will, the self-style is displayed, and the unique personality is displayed, which is deeply loved by the DIY family.
9, whether the wardrobe accessories are complete, can provide convenient and comfortable supporting functions
At present, many wardrobe manufacturers have introduced practical and beautiful accessories, such as push-pull mirrors, lattice racks, pants racks, fashion drawers, pull baskets, L-frames, TV stands, CD racks, wooden hangers and so on.
10. Whether to choose green materials
The artificial sheet used for furniture nowadays, because the adhesive with formaldehyde is used in the production process of the sheet, it is inevitable to contain formaldehyde in the finished furniture. If the formaldehyde content of the door or cabinet material of the wardrobe is too high, it will definitely affect the health of the user. According to the national standard, E1≤1.5mg/L, E2≤5.0mg/L.
11, how to after sales
As an important part of furniture, wardrobes are closely related to people's daily lives. Therefore, the good reputation of the manufacturer and the excellent after-sales service are very important. When ordering, you must first find out how long the warranty period is. The general requirement is no less than 5 years (minimum of 3 years or more). In addition, in case of use problems, can provide timely and efficient repair service. After the wardrobe is installed, the manufacturer will generally issue a warranty card. The general manufacturer's warranty period is 3-5 years.
12. Do you have a professional factory?
In order to ensure production, most of the brand wardrobes have professional factories, modern machinery and equipment, assembly line production, and on-site installation. It completely avoids the inconvenience caused by the decoration company's on-site manufacturing. Moreover, the dimensional data of the product is accurate and the structure is rigorous, giving a whole sense of beauty.
Pallet Slip Sheet,Paper Slip Sheet,Plastic Slip Sheet Pallet,Plastic Sheets For Slip
DONGGUAN YEE HUP TRADING CO,.LTD , https://www.yeehupacks.com