[ Chinese wardrobe net ] Customized wardrobe not only has stylish and beautiful, space can be reasonably utilized and easy to disassemble, but for those who are not flexible in hand, custom wardrobe installation also requires tricks. Today, China Wardrobe Network tells you about the whole wardrobe installation tips, detailed finishing the custom wardrobe installation process, let's take a look.
Customized wardrobe installation process - preparation stage
1. The material is on the scene. More formal furniture manufacturers, cardboard packaging is generally shipped to the site. After unpacking, check the plates and hardware.
2. Fix the screws. The nails are generally left on the plates according to the design drawings, and the workers at the site use special tools to fix the screws.
3. Measure the side panels. Since the closet is placed against the wall, the side panel is sawn off at the position of the baseboard. After you have it, look it up and see if it fits.
Customized wardrobe installation process - installation phase
1. Place the bottom plate. The floor placed on the bottom of the wardrobe should be cleaned beforehand, because it will be very troublesome to clean up after installation.
2. Fixed frame. Install the side and back panels of the closet according to the grooves on the board and adjust the position between the boards.
3. Install the top plate. It is best to prepare a climbing stool on the scene. The top plate should be lifted up and then fixed with rivets.
4. Install the shelf. Place the shelf where you have previously screwed it and then secure it. Pay attention to the fixed position of the shelf and the back and side panels.
5. Fix the door rail. The door rails are installed on the top and bottom sides of the wardrobe. The material of the door rails is better, lighter and firmer.
6. Install the clothes rail. Fix the rivets in the reserved position and install the clothes rail. Note that the two sides should be balanced.
Customized wardrobe installation process - finishing stage
1. Install the door leaf. The two sliding doors should be attached to the position of the guide rails. Fix the door leaf first and then fix the guide rails at the bottom side to avoid the phenomenon that the door leaf falls off in the future.
2. Adjustment and improvement. After all the installations are completed, make a "full inspection" of the wardrobe. If there is any deviation, adjust it in time.
Customized wardrobe installation process - complete acceptance
Finally, check the wardrobe: Shake the cabinet to see if it is firm and the details are in place.
The reasonable installation of the custom closet, the item has a position suitable for you, can bring convenience to the consumer. The above is the custom wardrobe installation process for everyone, I hope to be able to help consumers who are ready to install custom wardrobes.
Our Microscope slides are great for students of all ages, from home-schoolers to college students looking for an excellent introduction to microscopy. The prepared slides give you the most diverse possible biological selection. These slides are premium and machine cleaned giving a sharp image.
Prepared Slides,Microscope Slide,Glass Cover Slide,Microscope Prepared Slide
Xinxiang Vic Science&Education Co.,Ltd. , https://www.hnmedicalsciencemodel.com