In Mould Label is a brand new form of label packaging that is different from traditional label packaging. Its appearance has a very significant impact on label packaging. In fact, in-mold labels have been popular in some countries in Europe and America for many years, and in-mold labels have finally begun to receive large-scale applications after they have waited for two or three years in the domestic market, attracting more and more insiders and end-users. attention.
Process Principle In-mold labeling is to embed a printed label into a container during the blow or injection process to integrate the label and container. Illustrate the basic process of in-mold labeling in the blow-molding process: stack pre-printed in-mold labels (pre-labels and back labels) into individual sheets and place them on the two labels of the in-mold labeler Inside the box. With the opening of the bottle mold, the robot picks up the front label and the back label, the label printing surface faces inwards, the solid adhesive surface faces outwards and is placed on both sides of the mold. The vacuum hole on the mold firmly holds the label. In the mold. When the raw material of the plastic bottle is heated and hangs down in a hose-like form, the labelled mold quickly closes and the air is blown into the hose so that it closely contacts the mold wall. This is the blow molding process. At this time, the temperature in the entire mold is still relatively high, and the label-shaped solid adhesive close to the preform of the bottle body starts to melt and is combined with the plastic bottle body. When the mold is opened again, the plastic bottle body is molded and the label is integrated with the bottle body.
Basic Features 1. Comparison with Traditional Labels There are three main forms of traditional label packaging: heat-shrinkable label packaging and direct screen-printed label packaging and adhesive label packaging (mainly self-adhesive label packaging). The direct screen printing label packaging method is to print the pattern and text on the container packaging by screen printing, the overall effect is good, the pattern and text have texture, but the quality of direct screen printing is not very ideal, more difficult to reflect Fine patterns and small text, at the same time if the color is more, the price of direct screen printing is more expensive; the use of heat shrink film (mainly PVC film) as the label packaging, as opposed to self-adhesive labels and direct screen printing labels The cost is low, but the heat-shrinkable label is easily damaged, the overall image is not very good, and it is not conducive to environmental protection; adhesive labels (mainly self-adhesive labels) can perfectly reflect the requirements of exquisite labels, but its cost is relatively hot Shrink film labels are more expensive.
The emergence of in-mold labels harmonizes the advantages and disadvantages of the above three traditional main label packaging methods to a certain extent. In-mold labels can not only achieve the printing quality of self-adhesive labels, but also have the overall effect of direct screen printing. .
â—† From the point of view of the cost of the label, it is generally believed that if the color of the label is more than four colors, the cost is the most expensive of the three conventional label packaging methods. From the point of view of the cost of the label material, the in-mold label of the same type of surface material is compared with the self-adhesive label, and the label material in the mold does not require the backing paper, so the cost of the label material has a certain space for decline. At the same time, if in-mold labels are used, it is no longer necessary to add labeling equipment or labelling workers like heat-shrinkable labels and adhesive labels (adhesive labels), which can save the cost. However, due to the need for special die-cutting equipment in the process of in-mold label printing, and the complicated printing process, the cost of printing the in-mold labels may be higher than that of conventional labels.
â—† From an aesthetic point of view, first, in-mold labeling is a new form of packaging. The use of in-mold labeling is undoubtedly very novel, especially for daily chemical products with label as the main external packaging; secondly, in-mold labels are the same. The tight combination of the bottle body has the overall effect of direct screen printing, and can perfectly reflect the delicate patterns and fine texts like a sticker; again, the in-mold label is combined with the bottle body and is not dry. Plastic labels and heat-shrink labels are less likely to be damaged, fall off, etc., and can maintain the integrity and appearance of the labels for a longer period of time. (To be continued)
Process Principle In-mold labeling is to embed a printed label into a container during the blow or injection process to integrate the label and container. Illustrate the basic process of in-mold labeling in the blow-molding process: stack pre-printed in-mold labels (pre-labels and back labels) into individual sheets and place them on the two labels of the in-mold labeler Inside the box. With the opening of the bottle mold, the robot picks up the front label and the back label, the label printing surface faces inwards, the solid adhesive surface faces outwards and is placed on both sides of the mold. The vacuum hole on the mold firmly holds the label. In the mold. When the raw material of the plastic bottle is heated and hangs down in a hose-like form, the labelled mold quickly closes and the air is blown into the hose so that it closely contacts the mold wall. This is the blow molding process. At this time, the temperature in the entire mold is still relatively high, and the label-shaped solid adhesive close to the preform of the bottle body starts to melt and is combined with the plastic bottle body. When the mold is opened again, the plastic bottle body is molded and the label is integrated with the bottle body.
Basic Features 1. Comparison with Traditional Labels There are three main forms of traditional label packaging: heat-shrinkable label packaging and direct screen-printed label packaging and adhesive label packaging (mainly self-adhesive label packaging). The direct screen printing label packaging method is to print the pattern and text on the container packaging by screen printing, the overall effect is good, the pattern and text have texture, but the quality of direct screen printing is not very ideal, more difficult to reflect Fine patterns and small text, at the same time if the color is more, the price of direct screen printing is more expensive; the use of heat shrink film (mainly PVC film) as the label packaging, as opposed to self-adhesive labels and direct screen printing labels The cost is low, but the heat-shrinkable label is easily damaged, the overall image is not very good, and it is not conducive to environmental protection; adhesive labels (mainly self-adhesive labels) can perfectly reflect the requirements of exquisite labels, but its cost is relatively hot Shrink film labels are more expensive.
The emergence of in-mold labels harmonizes the advantages and disadvantages of the above three traditional main label packaging methods to a certain extent. In-mold labels can not only achieve the printing quality of self-adhesive labels, but also have the overall effect of direct screen printing. .
â—† From the point of view of the cost of the label, it is generally believed that if the color of the label is more than four colors, the cost is the most expensive of the three conventional label packaging methods. From the point of view of the cost of the label material, the in-mold label of the same type of surface material is compared with the self-adhesive label, and the label material in the mold does not require the backing paper, so the cost of the label material has a certain space for decline. At the same time, if in-mold labels are used, it is no longer necessary to add labeling equipment or labelling workers like heat-shrinkable labels and adhesive labels (adhesive labels), which can save the cost. However, due to the need for special die-cutting equipment in the process of in-mold label printing, and the complicated printing process, the cost of printing the in-mold labels may be higher than that of conventional labels.
â—† From an aesthetic point of view, first, in-mold labeling is a new form of packaging. The use of in-mold labeling is undoubtedly very novel, especially for daily chemical products with label as the main external packaging; secondly, in-mold labels are the same. The tight combination of the bottle body has the overall effect of direct screen printing, and can perfectly reflect the delicate patterns and fine texts like a sticker; again, the in-mold label is combined with the bottle body and is not dry. Plastic labels and heat-shrink labels are less likely to be damaged, fall off, etc., and can maintain the integrity and appearance of the labels for a longer period of time. (To be continued)
Ningbo XISXI E-commerce Co., Ltd , https://www.petspetsaccessories.com