Of course, inkjet printers also need to be maintained, and there are many skills. Today, the editors have summarized some essential parts. If users pay attention to maintenance at ordinary times, there will be no problems in three to five years.
1. Speed-up and quality
Do you want the printer to run fast? Very simple, if it is a USB interface, it can generally guarantee the normal printing speed. If it is a parallel port, please set it to "ECP" mode in the BIOS and print driver, I believe you can obviously feel the increase in printing speed. For daily informal manuscripts, the use of acceptable quality "draft mode" can also greatly increase the printing speed. At the same time, friends who need multi-tasking can open the "spool" mode.
The quality improvement is mainly in several aspects: three-color printers do not use color ink cartridges to print black text, ink consumption is slow, not to mention the blackness of the text; text printing is best to use 80 grams of copy paper, so it is not easy to smear; pay attention to The paper can greatly improve the print quality. For example, in the print driver, we can see that the higher the print resolution, the more high-end printing paper is required. The glossy photographic paper is better than the inkjet special paper than the ordinary paper.
2. Paper jam and prevent the ink head from drying up
Inkjet paper is also very easy to jam-especially for printers that use the friction feed method, in addition to paper that cannot be too thin like needles, we mainly discuss the handling method after jams: very simple and practical The method is to stop printing immediately, put the adjustment lever to adjust the thickness of the paper at the maximum level, and then gently pull out, if it is to be dry, it is easy to damage the printer nozzle, we also need to learn the lesson, do not have wrinkles or cracks on the surface The broken paper is printed on an inkjet printer.
3. A must-have technique to prevent the ink head from drying up
Here I have a very useful little experience to provide to the readers: Epson printers in the northern region are particularly easy to use (dry for two or three days) because of the use of quick-drying ink, which can cause a blockage. It is enough to spend a little money. What should I do? My method is to soak a clean cotton cloth and put it next to the print head before work, because it will naturally evaporate water, and the water in the surrounding air is saturated, so the ink of the print head is not so easy to dry, even if it does not move for a week Will not block.
Multi layer waterproof pen bag, waterproof pen bag, waterproof portable tutoring bag, waterproof multifunctional tutoring bag
Dongguan Jinying Handbags Co.,Ltd , https://www.jinyingfashionbag.com