The baseboard is a common building material for home improvement. Its advantage is to prevent deformation of the wall caused by external forces. In the interior design, it plays a visual balance with the female corner line and the waist line. It has a strong beautification effect. Many decoration users do not know much about the installation method of baseboard, so we will talk about the installation method of baseboard today.
Baseboard installation method
Step 1: Preparation
The length of the baseboard is generally fixed, so when calculating the amount of use, as long as the circumference of the room where the baseboard needs to be installed is measured, it is easy to estimate the amount of use, and it can be purchased in advance before installation.
Step 2: Material preparation
The choice of baseboard material depends on your personal budget. If you are a color insensitive person, you can choose the same or similar colors without making mistakes. Auxiliary tools, such as tape measure, pencil, sawtooth, etc., because the length of the side of the room is fixed, and the length of each baseboard is also fixed, so it needs to be cut during installation.
Step 3: Level the wall
The installation of skirtings requires smooth surface treatment at the installation location. If unevenness occurs, it must be dealt with, otherwise gaps are likely to occur, which will also have a great impact on aesthetics. Then use a pencil to mark the position where the baseboard needs to be installed, and fix the nail to the baseboard. The detail to be noted is that the baseboard should be close to the wall until the nail is completely submerged in the baseboard.
Step 4: Drill holes in the wall
Put the baseboard cut according to the length of the installation room on the side. Let's drill the hole first. Before making the mark, pay attention to stagger the installed hydropower project. Remind everyone that you must use special tools to drill holes in the wall, otherwise the hole distance is not accurate, and the baseboard will be difficult to stick to the wall. In order to be more firm, the interval between drilling holes should be about 40m (the interval between solid wood is smaller), and then the wooden strips are nailed into the holes. The purpose of this is to make the baseboard stronger.
Step 5: Panel stitching
When splicing the skirting board surface to the board surface, we generally adopt 45 ° cutting, which is natural and beautiful enough, and the same processing method is also applicable to the cutting of corner edges.
Precautions for installation of baseboard
For skirting materials of different materials, the skirting installation method also has a certain technical content. Generally, the height of the skirting is generally controlled at 8-12cm. If it is too low, it will appear asymmetry. If it is too high, it will be very eye-catching. People feel noisy.
About the installation method of baseboard, I have shared here. If you need to know more about decoration, building materials, home furnishing, you can follow this website and share more information with you.
What, the decoration still uses his own money? ! The Qi family is decorated in installments, with an ultra-low annual interest rate of 3.55% and a maximum loan of 1 million. Apply now to enjoy the discount
If you are interested in brand cooperation, content cooperation, and advertising of this website, please send an email to :.
Baseboard installation method
Ningbo Auland International Co.,Ltd. , https://www.ecocolabottle.com