Talk about using glue to make a big version

With the development of plate-making technology, according to the characteristics of the manuscript, direct electrographic technology can be applied. This process can vividly reflect the quality effect of electronic color separation. After the scan is complete, Yanggu Small Edition can be linked together into a large version for proofing or printing. It is simple and fast, saving labor and materials. However, the direct electricity distribution of the positive version of the small version or the customer's own positive version of the small version, if taped together into a large version of proofing or printing, easy to form a plastic paper mark; if the re-copy version, although the layout is clean, but it is expensive Expensive materials. In order to solve this problem, a glue-layout process can be used.
The specific method of this process is: generally require two people to operate at the same time, first shake the glue, from the positive version of the small version of the small figure about 20cm evenly sprayed onto the positive side of the small version of the non-pharmaceutical surface, and then paste according to the layout requirements On the film base, if it is not sticky, it can be donated at any time to re-stick. The advantages of this process are:
First, the operation is simple and rapid, saving labor and materials;
Second, the revision is convenient. Even if the single set is not properly assembled, replacement or rework is not necessary, and the change is extremely easy;
Thirdly, many intermediate links have been reduced, variable factors have been reduced, data has been accurate and stable, and outlets have been shaped once. There will be no changes such as ping and beating.
In order to prevent the running version of the phenomenon, you must use a special version of the folder and send version. The "Confucius Hometown" book we accepted (787mm'1092mm, 1.25 printed sheets and 128 open, 100B/m2 coated paper printing) achieved excellent results with this process.
Replaced with the ballpoint pen version of the version of the pen version of the PS printing out on the machine, if the text is not clear it needs to be repaired, but also serious re-printing. The PS version special edition pens sold on the market are durable, high in price, and can be easily dried if used infrequently. In my work practice, I found that ballpoint pens can be used instead of the revision pens. This method is very simple and effective.
Method of operation: First wipe the place where the PS plate is to be wiped with a cloth, then fill it with a ballpoint pen, and then mention the ink. After a while, wipe with water cloth to start printing. When using a ballpoint pen to make up the version, the force should not be too light, as long as you practice on the old PS version a few times to master it.