Surgical Equipment, Multi-Function Operating Table (XH910)

Multi-function Manual Type Operating Table
Model: XH910
Overall size: L2030*W500*690-1100mm

Properties:
1. The OT table consists of head, back, pelvic, leg and foot sections with mechanical control system for all adjustments.
2. Table top frame, column cover, base cover and side-rails are made of stainless steel which is rust proof, acid-resistant and impact resistant.
3. Table top is compatiable for C-Arm and radio translucent, fitted with full length cassette tunnel from head to pelvic section for X-ray photographing.
4. All movements are controlled manually by ratchet wheels and gas spring system.
5. Table height is adjusted by hydraulic pedal.
6. The OT table is mounted on strong castors to facilitate relocation of the table.
7. Supplied with antibacteria, soft slow recovery mattresses, thickness 6cm.

Functions introduction:
1. Length and width for tabletop: L2030*W500mm
2. Height (up/down): 690mm-1100mm
3. Trendelenburg/ reverse trendelenburg: 30° /30°
4. Lateral tilt (left/right): 20° /20°
5. Head rest (up/down): 40° /90°
6. Back section (up/down): 90° /15°
6. Foot rest (up/down &horizontal positioning): 15° /90°
7. Kidney elevator (up): 12cm



Accessories: Multi-function Manual Type Operating Table
Model: XH910
Overall size: L2030*W500*690-1100mm

Properties:
1. The OT table consists of head, back, pelvic, leg and foot sections with mechanical control system for all adjustments.
2. Table top frame, column cover, base cover and side-rails are made of stainless steel which is rust proof, acid-resistant and impact resistant.
3. Table top is compatiable for C-Arm and radio translucent, fitted with full length cassette tunnel from head to pelvic section for X-ray photographing.
4. All movements are controlled manually by ratchet wheels and gas spring system.
5. Table height is adjusted by hydraulic pedal.
6. The OT table is mounted on strong castors to facilitate relocation of the table.
7. Supplied with antibacteria, soft slow recovery mattresses, thickness 6cm.

Functions introduction:
1. Length and width for tabletop: L2030*W500mm
2. Height (up/down): 690mm-1100mm
3. Trendelenburg/ reverse trendelenburg: 30° /30°
4. Lateral tilt (left/right): 20° /20°
5. Head rest (up/down): 40° /90°
6. Back section (up/down): 90° /15°
6. Foot rest (up/down &horizontal positioning): 15° /90°
7. Kidney elevator (up): 12cm



Accessories:

Cup Standing Holders

Cup Standing Holders,Mug Holders,Cup Holder Stand,Cup Standing Holder

Jiangmen Jianghai Jianshang Houseware Co.,LTD. , https://www.jianshanghouseware.com