Today, when it comes to health and environmental protection, people tend to focus on the selection of solid wood furniture that uses relatively less glue and less paint. But in fact, in a wide variety of wooden furniture, there is also a kind of furniture resembling solid wood - solid wood veneer furniture.
These two kinds of furniture have their own merits.
Solid wood veneer furniture, usually based on artificial board, a layer of 0.6 mm thick solid wood skin is applied on the surface of the substrate, and a hole-opening paint is applied to protect the solid wood surface. In general, solid wood veneer furniture is the most popular with panel furniture. In the current market, the veneer of panel furniture is mainly composed of six materials such as sticker skin, veneer, baking varnish, crystal plate, fireproof board and molded board.
According to industry insiders, the natural texture of solid wood can make up for people's regrets about expensive solid wood furniture. It sticks natural veneer to the veneer of the substrate. It does not look very different from solid wood furniture, but the price is much cheaper. You can also choose the color and texture of different tree species, splicing into flowers, and so on.
However, the shortcoming is that at present, the recognition of solid wood veneer furniture products is not too high. Consumers generally believe that their quality is not high and there is resistance. Moreover, the surface of the skinned furniture product is not easy to clean, and it is easy to deteriorate in an environment that is too humid.
So, in the face of all kinds of furniture surfaces, how do we choose the one we want most?
According to industry insiders, the most fundamental difference between solid wood and leather furniture products is that the first is to look at the wood grain and the same solid wood. The grain of the two interfaces should be able to clearly see the natural connection between the longitudinal section and the cross section. The veneer furniture encounters two adjacent interfaces during the production, and usually does not turn, but each piece is attached, so the wood grain of the two interfaces should not normally be connected.
Extended reading: Seven strokes to buy solid wood furniture to prevent being fooled
When consumers buy solid wood furniture, if they are doubtful about whether the furniture they purchase is solid wood or solid wood veneer furniture, then it is necessary to ask whether it is pure solid wood or solid wood veneer. At the time of purchase, the salesperson should be presented with a product inspection report to see the environmental protection limit indicators, as well as the furniture instruction manual.
Try to choose a big brand with quality assurance, so whether it is solid wood or solid wood veneer furniture will be very craftsmanship, there is no need to worry about quality issues.
At the same time, the state clearly stipulates that when selling furniture, it must be accompanied by a furniture instruction manual with environmental protection instructions. If the merchant has always claimed to be all solid wood, then it must be marked "all solid wood" in the contract to prevent being deceived. The purchase of furniture invoices should also indicate whether it is solid wood furniture or panel furniture, and wood furniture cannot be written in general.
Cabinet Bumpers,Cabinet Door Bumpers,Cabinet Door Stops,Kitchen Cabinet Bumpers
Wenzhou Zhaoxia Hardware Co.,Ltd , https://www.zhaoxiahardware.com