Smoke making method of smoked furnace

Smoke making method of smoke furnace:
1. Similar to the traditional method of smoke production, smoke is generated when the burning material is not fully burned or semi-burned. It is common to add wood chips mixed with moisture to an electric burner to incompletely combust smoke.
2. Frictional smoke: The ancient method began to drill fire in ancient times. When the wood has not completely burned, wood will produce smoke by heat.
The principle of the dynamic heating method is similar to the hygrothermal decomposition method, but the difference is:
The heating medium is 300-400°C air, and the heating medium of the wet thermal decomposition method is a mixture of water vapor and air;
Sawdust is driven by compressed air into the reaction chamber; wood chips from the wet heat decomposition method rely on the transmission of the screw drive belt.
In some cases, the concentration of smoke may be insufficient. The smoke generated by the smoke generator enters the supercharge zone under the action of the blower. The supercharger zone is provided with a steam jet head. After the high-velocity steam and smoke are mixed, the smoke increases. Pressure, humidification purposes. This is a reference to a wider range of smoke enrichment methods.