Sticker Labels are widely used in electronic products, as are the TV industry. Commonly used are advertising labels, energy-efficient labels, and functional labels. General advertising labels are often used for promotional purposes or for labeling purposes. In the 1980s, when it was still in the CRT TV era, most of the TVs used electrostatic tags, and they worked well for a long time. Since 2004, LCD TVs have gradually replaced CRT TVs. The TV body is very slim. The revolutionary changes in the form of this product have also caused some problems for the application of labels. Here are a few common and difficult questions about the LCD TV industry label application.
How to print at low cost on black and white body barcode label
The bar code label on the back of the TV is generally printed off-line by a ribbon of white coated paper. For TV production plants, this is convenient because bar code labels carry a lot of product information, implied rules, and are not convenient for outward processing. The left picture shows the regular bar code printing effect on black and white on the white background. The picture on the right is the black bar white bar code effect picture. It is also the effect that our designer wants, that is, I hope the bar code label is not so obvious as much as possible, and there is less large area white. Whether ribbon printing can achieve this effect, please ask the experts.
I have seen in the market that the box of ASUS computer has a bar code label with white text on a black background. The effect is good, and the fineness of the characters is high. After analysis, it is found that the coated paper is not dry. Offset black ink, then cover the matt film, and finally print the white ribbon, but this method is costly, which is several times the cost of printing black paper barcode on white paper.
Is there a high temperature resistant material to replace the fiberglass tape inside the machine?
　　 Glass fiber tape is mainly used as a line of care, and is also a commonly used material in the television industry. When the LCD TV is working, the maximum temperature of the fuselage can reach about 60 °C, and the local temperature will be higher, which causes the glass fiber tape used for the cable management inside the chassis to fall off easily, causing the TV to malfunction. Is there a highly reliable material that can be used to secure the wire inside the machine?
Fiberglass tape inside the TV case
How to match the LCD label or front frame label to a narrow border
　　 In recent years, with the aesthetic needs of consumers and the continuous improvement of the manufacturing technology of the company, the outer frame of the LCD screen has become narrower and narrower, and some TVs have even a borderless design. In the Asia-Pacific market, TV screen advertisement labels are widely used, and the purpose is to show consumers the function selling points or certain specifications of TV sets, and play a certain propaganda role. In the past, the frame of the LCD TV has a width of at least 20mm. The advertising label can be made of a removable adhesive material and attached to the frame. Now the frame of the TV is generally 5~8mm, and some products are close to no border, only 1 ~ 2mm width, so the label has almost no place to paste on the border. How to make the label paste on the front of the LCD TV, and to ensure no residue, no warping, no falling off, we have been looking for an ideal method. There are many ways to post LCD TV tags on the market. There are direct stickers, stickers on the frame, and tapes are attached to the TV case, but each has its own advantages and disadvantages. Regardless of the type of attachment, the label must pass the environmental suitability test. The high temperature and high humidity detection conditions are 60 ° C, 90% humidity for 72 hours, and the low temperature detection condition is -10 ° C, 72 hours.
TV body barcode label
With the development of science and technology in daily life, technology has made a lot of things very convenient. People rarely need an axe in their daily life. The axe gives people the feeling that it is a tool for cutting wood and defending themselves. But sometimes the function of an axe can not be replaced by other things. Next, let's learn about the knowledge related to multi-functional axes!
The multi-functional axe is a multi-functional rescue hand tool, a portable hand tool integrating the functions of spade, axe, hammer, pry, saw, etc. It is a good rescue helper carried by the military, armed police, fire fighting, disaster relief and rescue personnel. It can carry out rescue work in various special occasions such as fire scene, disaster scene (broken doors, windows, plates and earthquake, collapse, vehicle and other accidents), and can well solve various rescue problems. It is one of the demolition and rescue tools for rescue and relief, and also an essential tool for survival in field activities.
Features of multi-function axe:
1. The multi-function axe is a portable multi-function hand tool It is a multi-functional hand tool integrating axe, pliers, knife and abrasive tools.
2. The full set of tools are packed with a special tool kit (flame retardant material), which can be buckled on the belt and carried with you. It is very convenient to use.
3. The whole set of products are designed with ergonomics, and the structure is compact and reasonable; According to the different occasions of using the tools, select various high-quality steel materials matching them to meet the use effect.
4. Multi functional hand tool, with detachable function, the whole set of tools only share one main handle, and the only handle is used together with other tool heads.
5. The whole set of tools are mostly machined, with high surface roughness, good matching performance, flexible and convenient use, and beautiful appearance.
Camping Supplies,Camping Gear,Camping Tools,Wilderness Tools,Field Tools
OYEAL Global , https://www.oyeal-home.com