[ Chinese wardrobe net ] Although the overall wardrobe is popular, there are still many people who don't know much about the panels used to make the wardrobe . The result is a bad wardrobe. If you want to pick a good wardrobe, then you have to know a little about the panels that make the wardrobe.
First, learn to distinguish plates
How to judge the panel of the custom closet? Generally, look at the cut surface of the sample. From the cut surface, the blockboard is the upper and lower two or four layers of the veneer close to the solid wood core; the MDF is pressed by the fine fiber, and the combination is compared. Tight, heavy weight; particleboard is a wooden granular structure, but the combination is not tight enough, the weight is light, the quality is poor, even small pores can be seen; the multi-layer board is made of a plurality of veneers, generally It is three or five layers.
Second, check whether the board is environmentally friendly
Professional custom wardrobe manufacturers use environmentally friendly panels that meet national testing standards, while some manufacturers use inferior panels that have no test reports and pose a potential threat to human health. Therefore, the purchase of custom closet should first look at whether the business has a plate inspection report and relevant testing certificate from the national authority inspection department.
Third, check the quality of the board
Some wardrobes look good on the surface, however, with a light stroke, you can draw obvious scratches. These custom-made wardrobes are made of surface-coated vellum paper or ornate paper sheets that are often used in low-cost wardrobes on the market, and have poor wear resistance. Professional custom closet manufacturers generally use environmentally friendly melamine veneer with thick thickness and high temperature and high pressure treatment, high surface strength, abrasion resistance and scratch resistance.
Fourth, look at the sheet metal process
Professional custom-made wardrobe manufacturers use precision panel saws to cut sheets, and there is no chipping around the sheets. After the edges are sealed, the water in the air is effectively prevented from intruding into the interior of the board. Some manufacturers have no professional equipment, rough cutting, and obvious edge collapse around them.
The board is the main part of the overall wardrobe, and the selection of the board allows you to take a lot of detours.
waterproof pet bed,elevated pet bed,pet sofa bed,pet bed cover
AUTRENDS INTERNATIONAL LIMITED , https://www.petspetskitty.com