Using the typesetting systems of Founder, Versace and Feiteng, it is impossible to develop output. Founder PSP is an excellent publishing system. PSP has many issues that should be noted that, knowing the reasons, the fault will be eliminated.
I. What is the reason why PSP issues files?
When the PSP is issued, some files can be output, and some files cannot be lost or appear to cause serious problems. When the manuscript is issued, the first page cannot be output, but two or three pages can be output or sent. It's annoying to get stuck on a page.
1. Some font file is missing in PSP, or some font file byte is 0
Sometimes considering whether there is something wrong with the PSP system, reinstall the PSP system and reinitialize it. In fact, there is nothing wrong with the system itself. It is very likely that the PSP fonts are missing fonts. To understand the situation, you can enter the PSP directory and enter the FONT subdirectory. List the font files with DIR/P, find the font with 0 bytes, and use the note down. For example, the WTJ.PFS byte is 0, so if there is a Wei body in the output file, it will fail.
If there are Founder disc fonts, you can copy them in. Use the DOS command or program group in WINDOWS to copy and paste commands to overwrite the desired font files. Font font copying takes into account the consistency of the font nature. Since the Founder publishing system has multiple versions, the format of the fonts for each type of publishing system is different, and the copied fonts must be consistent with the font suffixes in the PSP fonts. . If you copy in the DOS state, Access denied, then the PSP distribution font file has a read-only attribute, use the ATTRIB command to remove the read-only attribute, and then copy. Briefly talk about the ATTRIB command, ATTRIB is a DOS command, such as the removal of Wei jian WTJ.PFS read-only, with the command: ATTRIB WTJ.PFS-R. Disable read-only for amber simplified HPJ.PFS with the command: ATTRIB HPJ.PFS-R. If you do not have a DOS system installed, use WINDOWS 3. Like the X system or WINDOWS9X can remove the read-only attribute. If you have a DOS system that also has an ATTRIB.EXE file but it cannot be used, type the specified path in the C:PSP\FONT directory. Use the command: PATH=C:\DOS and then release the read-only operation.
What if I don't have a CD library? If you have PSP fonts on the hard disk of other computers, you can use hard disk copy method. If you have a local area network, you can copy it directly. Hard disk copy method to re-CMOS settings, for operators who are not familiar with CMOS settings, arbitrarily changing the CMOS settings will cause great trouble.
2. Problems with PSP path and FONT path
The PSP that I used to use had a problem with my computer and I can't post it. I use the XCOPY command to copy the PSP distribution system (the full decompression of the system files) from the CD to the hard disk, operate in the PSP directory, the result can not be issued. The TREE|MORE command was used to find that there is a subdirectory PSP under the PSP. Under the subdirectory PSP, the font is not issued in the first layer of the PSP directory. This does not work. Since WINDOWS 98 was not installed at the time, WINDOWS 3.2 was unfamiliar, and it was still solved under DOS. So I used the MOVE command to move all the files in the PSP subdirectory PSP back to the parent directory. In the path C:\PSP\PSP\FONT, use MOVE*.*.. These DOS commands are a skill that should be used by computer operators who use software under the DOS system.
3. Initialization problem
The PSP system must be initialized before the PSP is dispatched. Copying the font does not mean that it can be used. If a certain font byte is 0, the system has initialized the default font so that it can output. However, if a certain font is not originally available, it will only be initialized by the PSP system.
In the WINDOWS can be initialized to the PSP system, find the PSSETUP icon, if in WINDOWS3. X does not have this icon, you can use the new command to select the file PSSETUP.EXE under the PSP path to create. If you can find the PSSETUP file in the PSP directory on the Start menu or "My Computer" in WINDOWS 9X, then create a shortcut to send it to the desktop.
If initialization cannot be used, this is because there is a problem with the VM.INI system configuration file. This file may be added with read-only, hidden, or system attributes. Remove such attributes in the DOS state or WINDOWS state, and then re-initialize the PSP system.
Second, the prompt PSP card has serious problems
Since the PSP's configuration system file version is constantly updated, the PSP card is also different. If it is an old card and the new system is installed, there will be problems with the PSP. In normal circumstances, PSP faults indicate that there is a problem with the PSP card and should be treated with caution. If there is such a floppy disk or optical disk software for the PSP card, and these disks can be read out, they can be reinstalled. However, if there is no supporting software and such problems occur, the PSP system in the hard disk should be backed up on another hard disk or optical disk before processing.
1. PSP card is not inserted
The PSP card is an Founder system encryption card inserted on the motherboard. Due to the movement of the main chassis, or an interface on the PSP card, the PSP card is pushed when the signal line is connected, so that the PSP card is misaligned. Pull out the PSP card gently and re-insert it in the slot. Be careful when inserting and do not damage the hardware such as the motherboard. The PSP card has a groove on its lower edge and can be seen in the direction of its socket. After inserting the PSP card, perform system operations.
2. Virus infestation
Many viruses enter the hard disk through floppy disks, optical disks, or networks. However, some viruses are lurking in the hard disk when they are installed. Viruses intrude on the system execution files and transmit the suffixes with EXE and COM files. The lighter ones are the slow running of the system and the most serious ones are flaws. Anti-virus software such as KV300 and Rising was used for anti-virus. After the anti-virus system, the system was operating normally. In the past, the virus that I used was 3783. The virus was not harmful to the system. However, after the system was infected, WINDOWS 95 and WINDOWS 98 could not be started. After the virus was killed, it started normally. After the CIH virus enters the computer and infects the PSP system, the PSP cannot perform its tasks normally. Killing the virus will have to scan the partition of the hard disk mountain to kill all viruses, use all the floppy disks to kill viruses, and discs with viruses should not be used lightly. You must use the contents of the PSP on the CD-ROM. You must install the PSP system on the hard disk before disinfecting the hard disk. If the CD-ROM cannot be installed due to poison, you can copy the contents of the CD-ROM to the new path on the hard disk for antivirus. Install it.
2, after the word is made but how to do
Words created in the PSP are stored on the hard drive under the path C:\PSP\FONT\FON, such as the font book SongJianJian SSJ. After the word is created, the saved file name is SSJ. FON, there are skeleton fonts KTJ.FON, black simplified HBJ.FON and other fonts. These font files increase according to characters, and the bytes also increase.
1. It is not correct to set the path of the PSP font
The path set during the make-up word is C:\PSP\FONT, and the path to set up the sub-word library during the PSP publication should also be C:\PSP\FONT.
2. Initialization problem
When the PSP system is initialized, the priority of the main character library should be selected without adding the check mark.
3. Problems with storing documents
After saving the word, choose to add a word to the word bank, and then confirm.
4. The coding of the file is inconsistent with the coding of the PSP
The word in the file is entered with an internal code, which does not correspond to the word code created in the PSP font. Or the PSP created the book Song Song, and although the word coding in the file is correct, it is given in other fonts. Of course, the word made cannot be output.
5. Cannot make the word
The failure to create a word is most likely due to the read-only attribute of the font in C:\PSP\FONT, which is resolved by removing the read-only attribute.
For making mistakes, it is necessary to take note of the characters and write down the typeface used. The created word code should be consistent with the word code in the document. After the output, it should be checked against the manuscript. Inconsistent, correct in time.
The above is my experience in the actual use of the PSP system, which may be omissions, peer review criticism
I. What is the reason why PSP issues files?
When the PSP is issued, some files can be output, and some files cannot be lost or appear to cause serious problems. When the manuscript is issued, the first page cannot be output, but two or three pages can be output or sent. It's annoying to get stuck on a page.
1. Some font file is missing in PSP, or some font file byte is 0
Sometimes considering whether there is something wrong with the PSP system, reinstall the PSP system and reinitialize it. In fact, there is nothing wrong with the system itself. It is very likely that the PSP fonts are missing fonts. To understand the situation, you can enter the PSP directory and enter the FONT subdirectory. List the font files with DIR/P, find the font with 0 bytes, and use the note down. For example, the WTJ.PFS byte is 0, so if there is a Wei body in the output file, it will fail.
If there are Founder disc fonts, you can copy them in. Use the DOS command or program group in WINDOWS to copy and paste commands to overwrite the desired font files. Font font copying takes into account the consistency of the font nature. Since the Founder publishing system has multiple versions, the format of the fonts for each type of publishing system is different, and the copied fonts must be consistent with the font suffixes in the PSP fonts. . If you copy in the DOS state, Access denied, then the PSP distribution font file has a read-only attribute, use the ATTRIB command to remove the read-only attribute, and then copy. Briefly talk about the ATTRIB command, ATTRIB is a DOS command, such as the removal of Wei jian WTJ.PFS read-only, with the command: ATTRIB WTJ.PFS-R. Disable read-only for amber simplified HPJ.PFS with the command: ATTRIB HPJ.PFS-R. If you do not have a DOS system installed, use WINDOWS 3. Like the X system or WINDOWS9X can remove the read-only attribute. If you have a DOS system that also has an ATTRIB.EXE file but it cannot be used, type the specified path in the C:PSP\FONT directory. Use the command: PATH=C:\DOS and then release the read-only operation.
What if I don't have a CD library? If you have PSP fonts on the hard disk of other computers, you can use hard disk copy method. If you have a local area network, you can copy it directly. Hard disk copy method to re-CMOS settings, for operators who are not familiar with CMOS settings, arbitrarily changing the CMOS settings will cause great trouble.
2. Problems with PSP path and FONT path
The PSP that I used to use had a problem with my computer and I can't post it. I use the XCOPY command to copy the PSP distribution system (the full decompression of the system files) from the CD to the hard disk, operate in the PSP directory, the result can not be issued. The TREE|MORE command was used to find that there is a subdirectory PSP under the PSP. Under the subdirectory PSP, the font is not issued in the first layer of the PSP directory. This does not work. Since WINDOWS 98 was not installed at the time, WINDOWS 3.2 was unfamiliar, and it was still solved under DOS. So I used the MOVE command to move all the files in the PSP subdirectory PSP back to the parent directory. In the path C:\PSP\PSP\FONT, use MOVE*.*.. These DOS commands are a skill that should be used by computer operators who use software under the DOS system.
3. Initialization problem
The PSP system must be initialized before the PSP is dispatched. Copying the font does not mean that it can be used. If a certain font byte is 0, the system has initialized the default font so that it can output. However, if a certain font is not originally available, it will only be initialized by the PSP system.
In the WINDOWS can be initialized to the PSP system, find the PSSETUP icon, if in WINDOWS3. X does not have this icon, you can use the new command to select the file PSSETUP.EXE under the PSP path to create. If you can find the PSSETUP file in the PSP directory on the Start menu or "My Computer" in WINDOWS 9X, then create a shortcut to send it to the desktop.
If initialization cannot be used, this is because there is a problem with the VM.INI system configuration file. This file may be added with read-only, hidden, or system attributes. Remove such attributes in the DOS state or WINDOWS state, and then re-initialize the PSP system.
Second, the prompt PSP card has serious problems
Since the PSP's configuration system file version is constantly updated, the PSP card is also different. If it is an old card and the new system is installed, there will be problems with the PSP. In normal circumstances, PSP faults indicate that there is a problem with the PSP card and should be treated with caution. If there is such a floppy disk or optical disk software for the PSP card, and these disks can be read out, they can be reinstalled. However, if there is no supporting software and such problems occur, the PSP system in the hard disk should be backed up on another hard disk or optical disk before processing.
1. PSP card is not inserted
The PSP card is an Founder system encryption card inserted on the motherboard. Due to the movement of the main chassis, or an interface on the PSP card, the PSP card is pushed when the signal line is connected, so that the PSP card is misaligned. Pull out the PSP card gently and re-insert it in the slot. Be careful when inserting and do not damage the hardware such as the motherboard. The PSP card has a groove on its lower edge and can be seen in the direction of its socket. After inserting the PSP card, perform system operations.
2. Virus infestation
Many viruses enter the hard disk through floppy disks, optical disks, or networks. However, some viruses are lurking in the hard disk when they are installed. Viruses intrude on the system execution files and transmit the suffixes with EXE and COM files. The lighter ones are the slow running of the system and the most serious ones are flaws. Anti-virus software such as KV300 and Rising was used for anti-virus. After the anti-virus system, the system was operating normally. In the past, the virus that I used was 3783. The virus was not harmful to the system. However, after the system was infected, WINDOWS 95 and WINDOWS 98 could not be started. After the virus was killed, it started normally. After the CIH virus enters the computer and infects the PSP system, the PSP cannot perform its tasks normally. Killing the virus will have to scan the partition of the hard disk mountain to kill all viruses, use all the floppy disks to kill viruses, and discs with viruses should not be used lightly. You must use the contents of the PSP on the CD-ROM. You must install the PSP system on the hard disk before disinfecting the hard disk. If the CD-ROM cannot be installed due to poison, you can copy the contents of the CD-ROM to the new path on the hard disk for antivirus. Install it.
2, after the word is made but how to do
Words created in the PSP are stored on the hard drive under the path C:\PSP\FONT\FON, such as the font book SongJianJian SSJ. After the word is created, the saved file name is SSJ. FON, there are skeleton fonts KTJ.FON, black simplified HBJ.FON and other fonts. These font files increase according to characters, and the bytes also increase.
1. It is not correct to set the path of the PSP font
The path set during the make-up word is C:\PSP\FONT, and the path to set up the sub-word library during the PSP publication should also be C:\PSP\FONT.
2. Initialization problem
When the PSP system is initialized, the priority of the main character library should be selected without adding the check mark.
3. Problems with storing documents
After saving the word, choose to add a word to the word bank, and then confirm.
4. The coding of the file is inconsistent with the coding of the PSP
The word in the file is entered with an internal code, which does not correspond to the word code created in the PSP font. Or the PSP created the book Song Song, and although the word coding in the file is correct, it is given in other fonts. Of course, the word made cannot be output.
5. Cannot make the word
The failure to create a word is most likely due to the read-only attribute of the font in C:\PSP\FONT, which is resolved by removing the read-only attribute.
For making mistakes, it is necessary to take note of the characters and write down the typeface used. The created word code should be consistent with the word code in the document. After the output, it should be checked against the manuscript. Inconsistent, correct in time.
The above is my experience in the actual use of the PSP system, which may be omissions, peer review criticism
Paper Calendars, Wall Calendar Printing, Table Calendar, Weekly Planner
Paper Boxes,Paper Cards Co., Ltd. , http://www.cnpaperbags.com