[ Chinese wardrobe net ] [Chinese wardrobe net ] In the process of customizing the wardrobe, the size of the wardrobe is very important. When customizing a wardrobe, we must first measure the design and size. What are the details about the design and size of the overall wardrobe ? Let's take a look.
Overall wardrobe renderings
Sliding door wardrobe:
If the height is below 2300, the frame depth can be controlled at 600. Pay attention to the internal structure to be 100. This is used for sliding door installation. The internal structure can be defined by yourself, paying attention to the size of the drawer so that the door cannot be opened after installation. The width is best between 45 and 60 cm, and the sliding door is the best between 60 and 80 cm. The pressure capacity of the hinge is not as good as the track, so for the case of the swing door, the door panel should not be too wide or too heavy.
External door wardrobe:
High control is better than 2400. For high room walls, I want to make 2800 height cabinets. For this special case, it is best to do it separately. In addition, the height of the external door panel is controlled to be less than 450 within 1500, otherwise it is too large to be easily deformed.
Swing door wardrobe door:
When installing the clothes rail, it should be noted that the clothes rail must be taken according to the actual depth of the wardrobe interior, and the distance from the upper board must be 4-6 cm. This size must be met because the distance is too short. It will be more difficult to put on the hangers later. The distance is too long and it wastes space. Clothes rails also belong to the hardware series, I still recommend that you do not figure out the cheap. Good clothespins need to be screwed to the ends. The height of the clothes rail should be the height of the hostess plus 20 cm, which is convenient to take.
In addition, the dimensions of other places can refer to the following standards:
The height of the hanging coat is between 120-160 cm. Combine your own height and try to be just right. In addition, the hanging space is different from the storage space. It is also a waste of staying. Recommended 120-140 cm, which is suitable for the mass user community.
Tattoo tip is a tubes for needle go through and have different sizes based on the needle sizes. Normally,tips can be made by stainless steel and plastic.
Stainless steel tips can be sterile in autoclave and use many times,but plastic tips sterile packed and for disposable use.
Professional New Tattoo Tips manufacturer is located in China. Specialize In Manufacturing Wholesale Tattoo Machine Tips, Stainless Steel Tattoo Tip, Disposable Tattoo Tips, etc products. welcome to come to the consultation.
Disposable Tattoo Tip, Disposable Tattoo Tips
Amztatto Supply Co., Ltd. , https://www.amztatto.com