Plywood, MDF and particleboard are the traditional three major plates, and the decoration is basically used.
Divided by internal substrate
Solid wood particle board (particle board): solid wood is crushed into pellets;
MDF (fiberboard): solid wood is crushed into powder fibers;
Moisture-proof board: moisture-proof particles are added during the production process of the board;
Solid wood board (original board, solid wood board): solid wood stitching;
The finger joint board is formed by splicing a plurality of wooden boards, and the splicing place presents a jagged interface, which is similar to the cross-docking of two fingers;
Multi-layer solid wood board: (thin core board, plywood five-ply board) multi-layered wood of the same thickness is superposed and pressed;
Pvc board: raw material is pvc , that is, polyvinyl chloride, Andy board (Chevron board) is pvc sheet, similar to a solid solid sponge, the density is much more than the sponge;
Wood-plastic board: The material is made of wood and plastic, which has the appearance and texture of wood, and the lightness and texture of plastic;
Blockboard: (large core board, wood board, sandwich board, ecological board) in the middle of solid wood splicing, upper and lower with two pieces of 3mm composite solid wood sheet pressed and bonded;
Ozon board: a type of MDF;
Meiyan cement board: This belongs to the construction category, which is a kind of cement board;
Aluminum gusset plate: aluminum, refers to the raw material is aluminum, buckle, refers to the installation method, interlocking;
Aite board: a fiber cement board;
Osong board: ( OSB board) is made of small diameter material, thinned wood and wood core as raw materials, cut into small pieces, and the inner and the cross are staggered and pressed, and the structure is more stable. It is an oriented strand board, and the production principle is consistent with the particle board. It’s not just solid wood particles, but solid wood chips;
Hexiang board: using crop straw and straw as the main raw material, applying MDI glue and functional additives, and making it by high temperature and high pressure;
Calcium silicate board: It is made of siliceous calcium material and is made into a sheet of calcium silicate gel. It is widely used.
Gypsum board: commonly used as a ceiling, the raw material is gypsum.
Divided by surface treatment
UV board: UV is the abbreviation of ultraviolet light, which is the board that uses ultraviolet light to cure the surface paint;
Blister board: (film press plate) suction refers to adsorption, plastic refers to plastic, film refers to film such as pvc , pressure refers to pressing, is to take a piece of carved plate with a shape, paste and absorb a color The texture of the film, the quality of this film can be important;
Baking lacquer: The surface of the board is made of baking varnish. The lacquer is roughly divided into metal baking varnish (such as car paint lacquering process), piano lacquering (referring to piano lacquering process), ordinary baking varnish;
Cladding plate: The surface of the plate is coated with a surface treatment, which is similar to the molded plate. The difference is that the coating process emphasizes wrapping, and the cold process is adopted. Generally, the film used is relatively thin;
Melamine board (double veneer panel, primary molding board, paint-free board, ecological board, integral board): the surface is covered with a layer of melamine paper, the substrate is mostly particle board, MDF;
Acrylic sheet: The surface of the MDF board is affixed with acrylic. In general, acrylic is a transparent plastic;
Fireproof board: (fireproof board) is a general term. The surface of common home fireproof board is made of refractory material. Most of the base material is particleboard or MDF. It is mainly fireproof. The flame with higher temperature will burn the surface of the board. There will be no flame. When the fire burns to a non-fireproof substrate, a flame will appear. Of course, there is also a fireproof board with a fireproof material. Other steel sheets can be called fireproof boards or fireproof boards as long as they have fireproof performance.
Mei-resistant board: a kind of fireproof board, widely used, scratch-resistant, fireproof, easy to clean, commonly used in home business;
Polyester board: The core material is made of lightweight and high-strength honeycomb material. The surface is made of polyester glass fiber reinforced plastic. It is corrosion-resistant, easy to clean, wear-resistant, scratch-resistant, smoke-resistant, sound-absorbing, heat-insulating and anti-static.
Veneer: (Decorative panel) The surface is covered with natural veneer or technical veneer. The substrate is mostly particleboard or MDF. The technical finish is to spray the simulated real texture on the 3mm composite pressed plate.
Paint-free board: a general term, most of which refers to melamine veneer. In fact, as long as the surface is not painted by paint, the board that has been finished with other surface treatment before leaving the factory can be called a paint-free board;
Artificial leather decorative board: leather decorative board with artificial leather on the surface;
Yingge board: One side of the board is coated with a polymer bright surface coating on one side, and the substrate is a particle board.
Permanent Hair Color Cream,Hair Color Cream,Permanent Hair Dye Color,Ammonia Free Hair Color
DELIN HAIR COSMETICS , https://www.hairstylingwaxfactory.com