Glamaco Coswig, a German glass machinery manufacturer, and the IFW Joint Technology and Material Testing Research Institute in the country have jointly developed a new laser welding technology for flat glass and obtained related patent rights.
It is reported that this new technology uses a mixture of jet energy and thermal energy. Since almost no stress is released on the glass surface, the silicate material welding process can be realized. Compared with the traditional welding method, the advantage of this kind of laser welding technology lies in the high quality of the weld, which is extremely useful for welding flat glass of different uses. The company used two pieces of borosilicate flat glass with a coefficient of expansion of a=33·10-6k-1 for welding tests. In this case, the weld seam is 100mm long and 2mm wide. The reinforcement of the weld face and bottom surface ensures good welding. When welding, whether the parameter is suitable or not can reduce the weld to the minimum or increase. Since the best welding process control is achieved, the uniformity of each glass area is evident on the scanned electronic image. The laser welding process takes about 25 seconds. The maximum weld length for laser welding is 1500 mm, but there is no limit to the length of the welded part. Therefore, "infinite strips" can be welded.
Germany's Glamaac Coswig expects that this new laser welding technology will enable surface welding of different glass products. At the same time, the German company and the IFW Institute are also planning to further develop new uses for laser welding of different characteristics in this field.
For the meat marinating solution we refer to meat tenderizer, Saline mixer, Saline injector(brine injection systems), vacuum massage tumbler.
Saline injector can evenly inject the brine and salt auxiliary materials into the meat blocks, which can shorten the pickling time and greatly enhance the taste and yield of the meat products. The machine can be adjusted with stepping rate, stepping distance, injecting interval and injection pressure according to the technological requirements. Then the brine and salt auxiliary materials can be injected into the meat evenly and continually to reach the optimal effects.
While vacuum tumbler makes meat rolled in the drum under vacuum condition, similar to pulmonary respiration (make product to inflation and shrink alternatively). It makes meat salted evenly, increases the adhesive quality and taste and ensures the freshness of meat.
Injector series:multi needle injector,brine injector,poultry meat injector,fish injector,red meat injector,marinating injectors,pickle injector
Red meat and poultry injection machine with capacity of needles 50
Red meat and poultry injection machine with capacity of needles 74
Red meat and poultry injection machine with capacity of needles 118
Red meat and poultry injection machine with capacity of needles 236
Tumbler series:vacuum tumbler,meat tumbler
Small capacity vacuum tumbler and massager with capacity 200L and 500L
Medium capacity vacuum tumbler and massager with capacity 1000L and 1600L
High capacity vacuum tumbler and massager with capacity 2500L and 3500L
Turnover type vacuum tumbler and massager with capacity 2500L
Manual Brine Injector,Vacuum Tumbling Machine,Industrial Meat Tenderizer,Meat Tumbler,Poultry Meat Injector,Fish Injector,Red Meat Injector
Helper Machinery Group Co., Ltd. , https://www.helperpastamachine.com